Thursday, October 23, 2014

Fish tank coffee table

 

This is a project that my wife and I built on a 3 day weekend. We only had a jigsaw, and orbital sander, and a drill. Here is the story. I saw one of these cool fish tank coffee tables and thought it would be awesome to build one. I learned a thing or two about fish in the process. This was our first honest-to-goodness fish tank.  The first thing I did was to make a platform for the fish tank with 2x4's. Notice I left a gap between the top part to run cables in and out. My intention (as you can see from the pic) was to put the lights underneath. Not a good thing, as algae will form underneath your gravel and your fish will swim upside down. Notice that on the the first picture, the light has been moved to the top.

Then I built the legs around the fish tank (this is a 20 gallon high tank), so that there is enough clearance for cables and airlines. An air pump can be installed as seen in the following picture. I do not like air stones, and the water gets oxygenated enough with the ripples formed by the filter.
The next step was to attach pieces on the side and make a lid. I wish I had better pictures of the lid.


Now to stain the wood. Notice the picnic table... That poor thing got burn with my welder, painted, stained, until it eventually was removed, luckily now I have a work bench:
 Several layers later:

Then, I added those weird glass pebbles, to let the light through. Again, bad idea. This will trap fishy poopy and mess with the water chemistry of the tank. You want a fine substrate, thus the light has to be on the top. Thankfully, now LED lights are very compact and can be installed easily.
We had this setup like that for a while. Say hello to Pete (she is a girl, we didn't know).

Since then, we changed the light and we have Wilson, the blue betta, living there with some neon tetras, some cory cats, and a bristlenose plecos. They all get along just fine. Don't believe that stuff that bettas need small tanks and no tankmates. Please do not put two male bettas together, though.


Pete has moved to our 55gal tank:

and as you can see she lives with 5 giant danios and two bristlenose plecos.

Happy building!


Wednesday, October 22, 2014

Standing desk

This one is an old project, but looking at pictures I found a few of this project. So, here is a post about it. I decided to build this desk last year, when after working for extended hours I got a little clot on one of my legs. I had read about how marvelous standing desks are for your health, so I gave it a go. I now have two of them, one for the office and one for home. It takes some getting used to, but it certainly has helped as I have not have had a clot since then. This project requires welding, so may or may not be easy to make. Of course the design can be easily replicated with wood.

Now to the pictures (find Pookie in the first picture):



 This one is currently in my office:
 This is the one for home:
If I would have done the project for somebody else, I may have made the height adjustable. I was lucky and got the height right on my first attempt. However, this is something to consider.

Happy building!

Sunday, October 19, 2014

Second Pallet Chair

Today, I found out that not all pallets are identical. I had to modify some of my steps, but all in all the procedure is pretty much the same. This second pallet was in much better shape than yesterday's pallet. It made for a slightly taller chair, here are the pictures:


One thing that I was about to mess up today was the angle at the bottom of the rear leg. Make sure you measure those well...


 The one on the left is the one that I built today.

I did not paint them today, as the boss (my wife) wants them stained in a dark mahogany tone and that will take longer than just putting some linseed oil on. That will hopefully happen next weekend. Until then, happy building!

Saturday, October 18, 2014

Pallet chair

There ain't no rest for the wicked... Today, we went pick up some coffee with our friends at Jayells Coffee, and Lynda (the owner) offered us two free pallets. I have been wanting to make some of those "upcycled" pallet chairs, so of course, we brought them home.

 Hello, what is it that you brought? Smells like coffee... That's what Hope says.
So, after watching my Baylor Bears lose to WVU, I went ahead and started to build the first chair. Tomorrow, I will try to finish the second one. So, I started cutting the pallet:

Make sure those cuts are made as flush against the middle board as possible. I did not do this and ended up having to cut them flush after the fact, no biggie anyways. Then, cut this piece in half at a 45° (or close to that).  (EDIT: 45° ended up being to laid back. I ended up transforming the chairs into pool-side loungers, so it worked out. I'd say 60° should be better) I added an extra board to the sitting area:
Now you need to remove all the little boards from the remaining beam:
From this piece you can cut your back legs. I did not like the way I cut these pieces. At first I cut this piece in half, but found that the resulting legs were too long. Then, I had to cut them a little shorter, but I found out that pallets are not symmetrical in a bad way. So, my advice is put the seat at the height you want it to be and cut the legs at the appropriate height. Once this is done, you can screw the legs on the side, like this:
You see, that leg was way too long. You will need two screws on the top and bottom part. To make the back stand at the same height, I had cut the front legs out of a 2x2 I had in my shed, I attached the front legs (identical pieces) and then determined the height of the other rear leg:
Then, I put some long screws to secure the rest and the seat together and voilĂ :
 I definitively think it needs arm rests. Other than that, it is pretty comfy. The advantage of this design, is that you just use one pallet and about 34" of a 2x2 (97 cents at the hardware store). Now, it is time to paint the chair with some linseed oil, to protect it from the elements while keeping the rustic look.

I will post another update tomorrow, hopefully with the two chairs and maybe some arm rests... we'll see.

We ended up staining them. I like the color. It was a red wood stain.


Happy building!

Thursday, October 16, 2014

Fish tank canopy II

Just a few more pictures of the canopy:

 The tank was a little cloudy after adding the Eco-complete:
After adding plants and some fish:

Last night when coming back home we found that our black molly had some fry. Most were eaten by the other fish, but we managed to rescue 3 of them and they are in a breeder box at the moment. Hopefully, they manage to survive. 

Cleaner tank and more plants:

Saturday, October 4, 2014

Fish tank fix and canopy

A couple of weeks ago, we struck a deal on Craigslist. $100 for a 54gal corner tank with stand was too good to pass. When we brought the sucker back home, we found that it had some chips in the back corner. I decided to fix it in the best way I knew. Here's what I came up with. I had structural epoxy laying around in my shed; a result of fixing my row boat a few months ago (that blog entry may come in the near future). So I went to the hardware store and bought the thickest and widest aluminum angle I could find. It turned out to be a 2" x 2" x 1/4" piece. I cut it to fit the height of the tank (minus a bit, as I was off). I taped the tank to protect it. Then, I sanded the inside of the aluminum piece (as aluminum forms oxide that protects it from further corrosion, but also would hinder the epoxy to attach well), I washed both the aluminum and glass to prevent any oil to get in the way of the bond and then proceeded to mix my 1 to 1 epoxy mix. Then, I applied a generous layer of epoxy on top of the glass and taped the piece of aluminum on top. I was expecting some dripping epoxy, but I got more than expected. All in all, the fix looks neat and it held water (on the patio) for a week. Now, I feel more comfortable to move it indoors.

My plan is to plant this tank heavily, so the aluminum should not show much, if at all. That's all for the fix.

I also started building a canopy. As this blog was not started at that time, I did not take many pictures. I applied the first coat of paint on the inside today, and these pictures are pretty much all I have to show. So, here are the pictures:




I love how the paint reflects the sunlight, as this is what I want it to do to reflect all the light from the light bulbs back into the tank.

I have wired two 26W (or 23... not sure) CFL lights to attach onto the canopy. I will caulk the sockets and apply tape to keep the water condensation away from the electrical components. I also have a piece of plexiglass to make a barrier out of it. I will add more pictures once all these things are in place.

As for the steps to make the canopy, I will soon build another canopy for my rectangular 55gal tank. I will take many pictures of each stage then.

Now, it is time to go get a box filter, some Eco-complete substrate, a few snails and start cycling the tank... maybe a dehumidifier would also help. I have to let the paint cure for a week or two, so no fish or plants yet.  

Happy building!


Friday, October 3, 2014

Micromouse

Original plans

Today I will write a few notes about my little boat. First of all, these boats are great for a small adult or a kid. If you weigh more than 170lbs, I would recommend you build a larger boat. If you are on the smaller side, then these boats are great to enjoy flat waters. My wife and I have paddled in intracoastal estuaries and natural springs with no trouble. However, the wake of bigger boats cause some splashing inside the cockpit.

Anyhow, let us start with the building process. First you have to plot points on the plywood:
Look besides the board, I have Gavin Atkin's book. If you are interested in stitch-and-glue boat building, this book is a must have. After you have traced the curves and lines using a batten, you proceed to cut the panels:
Say hello to Hope! She was supervising my work. The next step is as technical as it can be... duct tape the panels together:
and
Then, you have to glue the boat together. Here you can go two routes epoxy or polyurethane. I went the polyurethane route. I used PL-Premium adhesive. A few words about the adhesive... it works. Now, it is messy as it can be. Let me list my perceived Pros and Cons.

Pros: Cheap, works, easy to apply (using a caulking gun, do yourself a favor and buy the big one), viscous enough that you don't need to add thickener.
Cons: Messy, bubbles up like crazy, funky vapors, did I mention it is messy? Also, it doesn't wet fiberglass tape easily. If you use PU adhesive, get the drywall tape instead of fiberglass tape (as you would use with Epoxy).

After you make the fillets, you have to put tape on top of the fillet and you cover it with glue.
I did not take many pics, until I had already placed the decks and was ready to glue the skeg. Here I disagree with Gavin Atkin's plans. I think that the decks should be traced but not glued until after you glue the gunwales. My reasoning for this is that the decks get in the way of the clamps. I built two of these boats. The first one as per the plans. For the second one, I traced and cut the decks, but I did not glue them. I attached the gunwales (clamping it every 6 inches to a foot) and then I glued the decks. That seemed to work a lot better.

I drilled 4" holes with a hole saw and test fitted two inspection ports. It is good to be able to detect if you have any leaks. I did have a few leaks that I had to patch. Would I have not added inspection ports, I would have only heard splashing in the "flotation tanks." Now, for your first paddle, DO NOT put your cellphone in the flotation tanks... you may find that some water came in and killed your phone... yes I did that. Anyways  a coat of paint and we are almost done.





A great thing of these boats is how quickly the are put together. You can build a boat in about a week if you use PU glue. It may take a little longer with epoxy.

Attach the painter hook, put it in the car (yes it fits inside the car), and go paddle:


If you decide to build one, let me know. I may be able to give you more insight :)

I realized I have a few more pictures of the boats, here they are:



All in all, each boat cost about $80. They handle really well and provide lots of fun.

 

Happy building!